Category Archives: Home Products & Services

Smart Tips For Uncovering Houses

1

How to Plan Your Home Improvement Project

Everyone will probably agree that the home is a special place. It is one’s sanctuary to hide away from the day to day pressures of busy lifestyles. It is also one of the largest investments we ever made in this lifetime.

Since your house occupies a key part in your life, it is just right for you to want the best for it. You’d surely try to preserve and improve it. But most people find it hard to plan out their home improvement projects.

So if you find it just as hard as everyone else does, check out these home improvement tips on planning your projects.

Read and study your projects

Most of the time, you already know what you want to do with your home. So all that’s left for you to do is to research on these projects. Doing research will give you an idea of the things that you need to prepare. But there’s more. Even if you don’t know what home improvements to make, your research will also help you. You can take a look at home improvement magazines, blogs or sites.

Fix your budget

Once you’ve made up your mind on your home improvement projects, you have to fix your budget to avoid money problems. This will serve as you guide to the succeeding decisions that you have to make.

Make a list of your projects

After doing your research, list down all the things you want to do. Then arrange them by order of your priority. Usually, bigger projects should be done first. You also have to decide whether you’d want to do a DIY or hire a contractor. This all depends on the amount of work that needs to be done and your own capacity to do them.

Hiring a contractor

The next thing that you need to consider is how to hire a good contractor for a home improvement project. You have to choose the one that gives you the best value for your money. Ask for recommendations from your friends. Talk to your possible contractors and get bids. Don’t forget to check the background of these contractors.

Get permits if needed

If you are planning to have large projects, you should ask the local building department for the necessary documents.

Purchase the materials

In order for you to cut costs, it is best for you to buy the materials needed altogether. List down all the necessary materials for the projects and check for the best deals in local hardwares. You can get big discounts if you buy in bulk so you will be able to save a lot.

Source: Home Improvement tips

SunPower Awards Semper Solaris with Residential National Dealer of the Year

7

FOR IMMEDIATE RELEASE

(SAN DEIGO, Calif.) March, 2016– Semper Solaris, a San Diego-based solar installer and SunPower Elite Dealer, today announced it has received the SunPower “Residential National Dealer of the Year” award for its outstanding performance as a SunPower dealer in 2015.

“Semper Solaris is honored to receive the 2015 ‘Residential National Dealer of the Year’ award from SunPower for our success delivering the world’s highest efficiency solar systems and superior customer service to homeowners,” said John Almond, CEO of Semper Solaris. “Partnering with SunPower, a leading solar technology and global energy services provider, allows us to offer our customers reliable solar energy and electricity savings over the life of their systems.”

The “Residential National Dealer of the Year” award honors SunPower residential dealers that demonstrate exceptional customer service, knowledge and leadership in the United States. SunPower’s global dealer network includes more than 500 dealers located in the U.S.

“We congratulate Semper Solaris for their extraordinary performance in 2015,” said Howard Wenger, SunPower president, business units. “As a SunPower Elite Dealer, they have demonstrated an outstanding level of quality, innovation and commitment to customer value, and we look forward to their continued success in 2016.”

In 2015, Semper Solaris took on a number of solar panel installation projects varying in size and complexity. Among these was a 54-panel, 15.4 kilowatt ground-mounted system in Rancho Santa Fe, Calif. This award winning solar company likewise engineered a non-standard mounting and reinforcement framework for a 40-panel roof-mounted system in San Diego’s East County. Other projects in the company’s portfolio include a smaller-scale 13-panel arrangement in Alpine, Calif as well as an 18-panel residential roof-mounted system in San Diego. Each of these undertakings incorporated SunPower’s high-efficiency solar technology.

Semper Solaris serves both Northern and Southern California in Alameda, Santa Clara, San Francisco, Contra Costa, Ventura, San Bernardino, Riverside, Imperial, Los Angeles, San Diego and Orange Counties. The San Diego solar company also holds a Better Business Bureau accreditation with an A+ rating. Their staff has received customer acclaim for excellent service and outstanding quality.

For more information on Semper Solaris, call (619) 715-4054 or visit

About Semper Solaris:

Semper Solaris is a licensed California solar energy installation company locally owned and operated by a team of veterans. The company is dedicated to excellence as well as extraordinary customer service and committed to furnishing American products with American leadership.

Source: http://business.bigspringherald.com/bigspringherald/news/read/31855659/SunPower_Awards_Semper_Solaris_Residential_National_Dealer_of_the_Year

A Simple Plan For Researching Equipment

12

Guidelines for Buying a Plasma Cutter

Are you thinking of buying a plasma cutter? It can be a daunting prospect to purchase a piece of equipment which is new to you, especially with a lot of manufacturers and models to consider.

As a start, there are a few questions you should ask yourself:

> How often in a day do you plan to use the equipment? What duty cycle should it have in other words?

> What electrical service type is available in the area where you will be using the machine? Is it 50 amp 220 volt single phase, or maybe 30 amp 110 volt single phase? What other machines or tools will be run on the same circuit simultaneously?

> What level of portability should your plasma cutter have? Are you going to use it in your shop exclusively, or do you have to take it to the job? Will you be able to supply the machine with compressed air in a remote location? Will you be using an air bottle or portable compressor? How about supplying the supply electric current at the site?

> What type of material do you intend to cut, and how thick will it probably be?

> Manual cutting or with a CNC cutting machine? Usually, a higher amperage output would mean a greater duty cycle at a lower amperage. Plenty of people think that a machine with greater capacity is always better, but not necessarily. Fabricators generally consider oxy-fuel to be better than plasma for steel cutting steel with a thickness above .5 inch; this is due to the slight (4 to 6-degree) bevel in the cut face produced by the plasma. You wouldn’t see it in thinner materials, but it does become more noticeable with increased thickness. Also, plasma has no advantage over oxy-fuel in terms of speed at thicknesses beyond .5 inch.

If you’ll be using acetylene for the work, there will be nearly no point in purchasing a plasma cutter. If your intention is to cut aluminum, stainless or any other non-ferrous metal, which oxy-fuel cannot cut, get a 50 to 80 amp 220 volt plasma cutter. If you’re going to use your plasma cutter outside the shop sometimes, you have to consider getting one of new breed of semi-portable types. These units are small powerhouses weighing under 100 lbs., but they can cut .75″ to 1″ in a pinch. You’ll be needing a compressor or bottle of air, plus a portable generator.

If you think you might automate your plasma cutting in the future, pick a unit that that runs on a low-frequency starting circuit. A high-frequency start is like your vehicle’s spark plug. Instead of using a relatively lower voltage pilot arc to start the plasma process, it relies on a high voltage spark, which causes electrical interference like destroying files, locking up the computer, and so on.

Source: Plasma Cutter

Lessons Learned from Years with Services

7

The Low Down on Interior Design

There is truly a lot of different aspects that you will have to keep into mind when you need to consider interior design because when you know the ins and outs on interior design you can truly make just about any home look amazing. Some people will go to school when they want to learn how to do interior design and to get good with making a place look awesome while other people are just naturally good and they are able to make anything beautiful and they just know what to do regarding interior design.

There is a lot of things that you will need to think about when it comes down interior design because people are pretty creative will not need to have training because they naturally already know what looks good but then some will need to go to school in order to figure how to do interior design. Because when you are creative then you can really decorate a home and make it look amazing without training because this is something that will come to you easily and naturally. While if you are not that creative then it is important that you are able to keep into mind a lot of different kinds of factors such as reading books, reading articles, and doing research so you can get some different ideas when it comes down to interior design.

There is some different kinds of steps that an interior designer has to take when they are making a design for a home and the first thing that they will typically do is choose a kind of atmosphere in order to make the design mesh together. Also there are different kinds of styles out there as well such as country, modern, and eclectic and each kind of interior designer will have their own tastes and their own bias towards different kinds of styles. You can choose any kind of style that you want and it does not matter but it is important that you are able to keep it simple because this will mean a lot when you are trying to make the best design possible because less is more and it will really make the whole home feel a lot better.

A lot of people only think that interior design is for aesthetic purposes and they do not realize that this is actually used for functional purposes as well and that the function purposes are very important especially when you are designing a home. And that is everything you will need to know regarding home design and why it is critical to do if you are trying to improve the overall look as well as the function of your home.

Source: Aspen Interior Design